VNX301無料過去問、VNX301問題トレーリング

Wiki Article

Versa NetworksのVNX301資格認定証明書を持つ人は会社のリーダーからご格別のお引き立てを賜ったり、仕事の昇進をたやすくなったりしています。これなので、今から我々社GoShikenのVNX301試験に合格するのに努力していきます。弊社のVersa NetworksのVNX301真題によって、資格認定証明書を受け取れて、仕事の昇進を実現できます。

Versa Networks VNX301 認定試験の出題範囲：

トピック出題範囲
トピック 1
  • SD-WAN Network Topologies and Routing Concepts: Examines the various deployment topologies such as hub-and-spoke or full-mesh, along with routing protocols and path selection mechanisms used across the WAN.
トピック 2
  • Underlay
  • Overlay Technologies: Covers the foundational transport networks (underlay) and the virtual networks built on top of them (overlay), including tunneling protocols used in SD-WAN deployments.
トピック 3
  • Versa SD-WAN Services: Covers the WAN services delivered through Versa's platform, including application steering, traffic policies, SLA monitoring, and link aggregation.

>> VNX301無料過去問 <<

VNX301無料過去問 & 資格試験のリーダー & Versa Networks Versa Certified SD-WAN Specialist (VNX300)

ご存じのとおり、競争の激しい世界では、国際的なVNX301認定、実務経験、学歴など、ソフトウェアの能力を向上させる以外に選択肢はありません。したがって、履歴書を強調するためにVNX301証明書を手に入れることは非常に重要であり、職場で成功を収めるのに役立ちます。 VNX301準備資料を使用すると、最も効率的かつ生産的な方法で試験に簡単に合格し、献身と熱意を持って勉強する方法を学ぶことができます。 Versa NetworksのVNX301問題集には多くの利点があります。

Versa Networks Versa Certified SD-WAN Specialist (VNX300) 認定 VNX301 試験問題 (Q37-Q42):

質問 # 37
You configured Direct Internet Access on your Versa branches using the workflow template. Which statement is true in this scenario?

正解：C

解説：
The correct answer is C . In Versa Secure SD-WAN, Direct Internet Access, or DIA, provides local internet breakout from the branch rather than backhauling internet-bound traffic through a hub. Versa design documentation explains that the DIA architecture creates an internal connection between the tenant VRF and the WAN transport VR and uses CGNAT to translate internet-bound LAN traffic to the public IP address associated with the WAN transport interface. It specifically states that the main DIA components include the CGNAT function for translating internet-bound traffic and that DIA is configured using Director Workflows when configuring tunnels.
When the workflow template is used and the DIA option is selected for the internet breakout tunnel, Director automatically builds the required DIA infrastructure, including the NAPT/CGNAT configuration associated with the internet-facing transport network. This is why manual creation of the CGNAT pool and rule is not required in the workflow-based method. Option A describes a manual configuration approach, not the workflow-generated behavior. Option B is incorrect because NAT must be associated with the internet-facing breakout path, not simply the LAN interface. Option D is incorrect because DIA normally requires address translation for LAN users accessing the public internet.


質問 # 38
Examine the exhibit below.
The exhibit shows a device group created for a new group of hubs. The device template called "BMBF- TEMPLATE" has an Address object called "Server". A network administrator creates the Class of Service Template called "Ship-CoS-IT" that has an Address object with the same name. Then it tries to onboard a new device to this device group.
Which statement is true about the configuration that this device will have?

正解：C

解説：
The correct answer is D . In the displayed post-staging template association order, the device template BMBF- TEMPLATE is applied before the QoS service template Ship-CoS-IT . Versa documentation explains that device templates, also called post-staging templates, provide the baseline configuration for devices, while service templates are service-specific configurations that can be applied to device configurations. It also states that service templates are associated with device groups and that, in a device group, the administrator can choose the order in which service templates are applied.
Because the QoS template is later in the shown association order, the final merged device configuration uses the Address object definition from the QoS template when the same object name exists in both templates. It does not automatically create two copies of the same Address object, because the object name is the key for the configuration element. It also should not fail merely because the same object name exists in a later template; the merge behavior resolves the effective configuration according to the template order. Therefore, the onboarded hub device receives the Server Address object version from Ship-CoS-IT, the QoS template.


質問 # 39
You configured a Versa speed-test server on a VOS device, but the client cannot start the bandwidth test. A firewall exists between the client and server. Which port must be allowed through the firewall?

正解：B

解説：
The correct answer is A . Versa link-bandwidth troubleshooting documentation explains that a VOS device can be configured as a Versa speed-test client, a Versa speed-test server, or both simultaneously. After the server is configured, the client starts the test by initiating a TCP-based connection toward the speed-test server. The server listens on port 5201 . The documentation includes an explicit note that if the VOS device is behind a firewall, port 5201 must be open .
This is different from the SD-WAN overlay data path, which commonly uses UDP-based transport encapsulation, and different from internet speed-test traffic, which uses other ports depending on the specific test type. In this scenario, the question states that a Versa speed-test server was configured, so the relevant requirement is TCP 5201 reachability from the client to the server.
TCP 443 may be used for management or web access, UDP 4790 is associated with SD-WAN transport encapsulation, and UDP 53 is DNS. None of those replace TCP 5201 for Versa speed-test server operation.


質問 # 40
You need to quickly check interface administrative status, operational status, tenant ID, VRF, MAC address, and IP address on a VOS device. Which command should you use?

正解：B

解説：
The correct answer is A . Versa's handy CLI command reference lists show interfaces brief as the command used to view a list of interfaces along with their MAC addresses, operational and administrative status, tenant ID, VRF, and IP addresses. This is one of the first commands administrators run when validating device bring- up, staging interface assignment, WAN/LAN mapping, or whether a template applied interface addressing as expected.
For deeper interface troubleshooting, show interfaces detail provides additional information such as interface index, host interface, MTU, speed and duplex settings, RX/TX errors, and bridge information. However, for a quick overview of state and addressing across interfaces, show interfaces brief is the correct choice.
show system package-info identifies the running VOS software package. show system storage reports system storage resources. show coredumps shows generated core files. These are valuable operational commands, but they do not provide the requested interface status and addressing summary.


質問 # 41
Examine the exhibit below.
You are configuring Class of Service on a WAN-facing network interface, and you want to perform DSCP rewrite on the packets that are forwarded to the WAN.
However, you are not able to turn on DSCP rewrite.
Referring to the exhibit, what is the cause of this issue?

正解：B

解説：
In the exhibit, the Add Associate Interface/Network window has Interface selected, and the interface name is set to vni-0/0 . The DSCP rewrite option is not available because rewrite behavior is intended to be applied at the network association level for the WAN network, not directly while associating only the physical
/logical interface. For WAN-facing CoS, the scheduler and shaping parameters can be attached to an interface, but DSCP rewrite policies are applied to remark traffic as it exits through a network context.
Versa SD-WAN design documentation explains that QoS rewrite rules rewrite packet QoS attributes as packets leave the VOS device, and that rewrite rules can modify IEEE 802.1p bits, IPv4 TOS/DSCP bits, and IPv6 traffic class bits. It also explains that a rewrite policy is commonly applied on a WAN network to remark traffic based on the forwarding class and loss priority assigned by QoS or App QoS policies. In the design example, Versa explicitly describes applying a QoS propagation or rewrite policy on the MPLS WAN network to remark traffic to a DSCP value. Therefore, the issue is the association type: it is set to Interface, not Network.


質問 # 42
......

Versa Networksは、短時間でVNX301認定を取得するために最善を尽くす必要があります。 認定資格を取得することが決まっている場合、VNX301質問トレントは喜んであなたに手を差し伸べます。 弊社のVNX301学習教材は、認定を取得するための最適な学習ツールになるためです。 ここで、VNX301試験問題を詳細に紹介します。紹介を注意深くお読みください。多くのメリットを得ることができます。 VNX301試験の資料に興味がある場合は、今すぐ購入できます。

VNX301問題トレーリング: https://www.goshiken.com/Versa-Networks/VNX301-mondaishu.html

Report this wiki page